Recently in my OMMConsumer application (EMA C++ (ema3.7.3.L1)) in pre-production received following 'Status Message' from RTO

}FtGroupId [100] SessionId [1] IsActiveSession [TRUE]{Output: Timestamp: 20251028-07:31:31.957967 StatusMsg
streamId="1"
domain="Login Domain"
state="Closed / Suspect / Internal error from sender / 'Login Denied:Failed to validate sso token'"
name="AQIC5wM2LY4SfczNcJMlLDrL2EYj5mB359SY0OIdh1Y9TpI%3D%40AAJTSQACMTAAAlNLABM4MTYxNTg5NTgxNTk0NDI3MjgwAAJTMQACMjU%3D%23"
nameType="1"
StatusMsgEnd
}

I have following question.

In a situation like this, should i attempt to reconnect automatically from my OMMConsumer application, or would you recommend manual intervention to re-connect? Asking this because, according to https://statics.teams.cdn.office.net/evergreen-assets/safelinks/2/atp-safelinks.html, this can occur due to an outage at refintive side.

If automatic reconnection with a fallback mechanism is recommended, which state should i look for to take that decision? "Stream State - Closed" is enough or should i consider Data state as well ?

I’m currently integrating with the Refinitiv Real-Time - Optimized Pricing API and need to configure firewall rules to allow traffic to specific streaming endpoints. Could you please provide the static IP addresses for the following hosts?

ap-northeast-1-aws-1-sm.optimized-pricing-api.refinitiv.net

ap-northeast-1-aws-2-sm.optimized-pricing-api.refinitiv.net

ap-northeast-1-aws-3-sm.optimized-pricing-api.refinitiv.net  
ap-southeast-1-aws-1-sm.optimized-pricing-api.refinitiv.net  
ap-southeast-1-aws-2-sm.optimized-pricing-api.refinitiv.net  
ap-southeast-1-aws-3-sm.optimized-pricing-api.refinitiv.net  
eu-central-1-aws-1-sm.optimized-pricing-api.refinitiv.net  
eu-central-1-aws-2-sm.optimized-pricing-api.refinitiv.net  
eu-central-1-aws-3-sm.optimized-pricing-api.refinitiv.net  
eu-west-1-aws-1-sm.optimized-pricing-api.refinitiv.net  
eu-west-1-aws-2-sm.optimized-pricing-api.refinitiv.net  
eu-west-1-aws-3-sm.optimized-pricing-api.refinitiv.net  
us-east-1-aws-1-sm.optimized-pricing-api.refinitiv.net  
us-east-1-aws-2-sm.optimized-pricing-api.refinitiv.net  
us-east-1-aws-3-sm.optimized-pricing-api.refinitiv.net  
us-east-2-aws-1-sm.optimized-pricing-api.refinitiv.net  
us-east-2-aws-2-sm.optimized-pricing-api.refinitiv.net  
us-east-2-aws-3-sm.optimized-pricing-api.refinitiv.net  

If there’s an official document or resource listing these IPs, a link to that would be greatly appreciated.

Thanks in advance for your support!

Kindly find attached log for reference.

How would I fix the issue? It seems that price don't come after and the message is repeating.

Thank you.

We're receiving the above noted messages via OmmInvalidUsageException thrown when processing rmtes fields on some of the RICs in Market Price domain. The code in question is as follows:

…

auto [item, _] = m_rmtes_values.try_emplace(field.getFieldId()); // Create new RmtesBuffer or return the existing, for a given field id.

item-second.apply(field.getRmtes());

return item->second.toString().c_str();

This gets executed only if following is true:

field.getCode() != refinitiv::ema::access::Data::BlankEnum && field.getLoadType() == refinitiv::ema::access::DataType::RmtesEnum

SDK version: Release Real-Time-SDK-2.2.3.L1 · Refinitiv/Real-Time-SDK

I've attached the messages which are causing the exception. Can you please review and advise if there is an issue with the field processing as outlined, or if there is an issue within the SDK?

Explanation of content in attached file:

The field ID which caused the exception e.g. field 3, with the content and length of the field (obtained by field.getLoad().getAsHex().c_buf() and field.getLoad().getAsHex().length()) e.g. Rmtes : 'Adeia Ord Shs' (14) :

2025-03-31 17:15:05.871 Error <140040275490560> Exception parsing field 3 : Rmtes : 'Adeia Ord Shs' (14) : Exception Type='OmmInvalidUsageException', Text='Failed to convert to UTF8 in RmtesBufferImpl::toString(). Reason: RSSL_RET_FAILURE', ErrorCode='-1'

The RIC and message domain type which contained the problematic field:

2025-03-31 17:15:05.871 Error <140040275490560> DEBUG: 8OZsg.STp (MarketPrice Domain)

The content of message (obtained by message.getAsHex().asRawHexString()):

2025-03-31 17:15:05.871 Error <140040275490560> DEBUG:
002c 0206 0000 5674 81fa 0400 0000 ce09

…

Another copy of message content (obtained by std::string(message.getAsHex().c_buf(), message.getAsHex().length())):

2025-03-31 17:15:05.871 Error <140040275490560> DEBUG:
^@,^B^F^@^@Vt<81><FA>^D^@^@^@<CE> ^@^@^B^@%^F^C^A^A3<81><C0> …

I assume we should be using the library here https://pypi.org/project/lseg-data/ ; it shows some examples. Are there a working versions of these examples? Stepping through the library code, it seems to be looking for a config file, and I assume that config file is some particular format. A working example would probably show that, along with other environment-specific configuration.

Thank you.

10:36:02,034 ERROR [com.fnx.service.adapter.refinitiv.JRefinitivAWSAgent] (pool-13-thread-3) JRefinitivAWSAgent: Failed to connect to Refinitiv ELEKTRON_DD Service. Caused by org/jose4j/lang/JoseException

10:36:07,041 INFO [com.refinitiv.ema.access.OmmConsumerImpl] (pool-13-thread-3) loggerMsg

ClientName: EmaConfig

Severity: Info

Text: Missing, unreadable or empty file configuration, path=[/of01/ironside/syb/lin/dev/domains/iristic-COPYDEV/EmaConfig.xml]

loggerMsgEnd

07 Nov 2024 08:43:03,848 INFO [ConfigTemplStaticConfigProcessor] ConfigTemplStaticConfigProcessor: Configuration [JRefinitivAWSAgent]: load parametar ClientSecret=***************

07 Nov 2024 08:43:03,849 INFO [ConfigTemplStaticConfigProcessor] ConfigTemplStaticConfigProcessor: Configuration [JRefinitivAWSAgent]: load parametar ServiceDiscoveryURL=

07 Nov 2024 08:43:03,849 INFO [ConfigTemplStaticConfigProcessor] ConfigTemplStaticConfigProcessor: Configuration [JRefinitivAWSAgent]: load parametar TokenURLV2=

07 Nov 2024 08:43:03,850 INFO [ConfigTemplStaticConfigProcessor] ConfigTemplStaticConfigProcessor: Configuration [JRefinitivAWSAgent]: load parametar ClientID=GE-36TO3ZZZMRYE

07 Nov 2024 08:43:03,851 INFO [ConfigTemplStaticConfigProcessor] ConfigTemplStaticConfigProcessor: Configuration [JRefinitivAWSAgent]: load parametar KeyStorePath=/syb/lin/dev/server/certs/aws/ref_keystore.jks

07 Nov 2024 08:43:03,852 INFO [ConfigTemplStaticConfigProcessor] ConfigTemplStaticConfigProcessor: Configuration [JRefinitivAWSAgent]: load parametar KeyStorePassword=***************

07 Nov 2024 08:43:03,852 INFO [ConfigTemplStaticConfigProcessor] ConfigTemplStaticConfigProcessor: Configuration [JRefinitivAWSAgent]: load parametar Service=ELEKTRON_DD

07 Nov 2024 08:43:03,852 INFO [ConfigTemplStaticConfigProcessor] ConfigTemplStaticConfigProcessor: Configuration [JRefinitivAWSAgent]: load parametar ProxyHost=10.49.98.4

07 Nov 2024 08:43:03,853 INFO [ConfigTemplStaticConfigProcessor] ConfigTemplStaticConfigProcessor: Configuration [JRefinitivAWSAgent]: load parametar ProxyPort=8080

We have connectivity from xterm using curl.

[linapp05 10:19]# curl -kv -x 10.49.98.4:8080 https://api.refinitiv.com

* Rebuilt URL to: 

* Trying 10.49.98.4...

* TCP_NODELAY set

* Connected to 10.49.98.4 (10.49.98.4) port 8080 (#0)

* allocate connect buffer!

* Establish HTTP proxy tunnel to http://api.refinitiv.com:443

> CONNECT http://api.refinitiv.com:443 HTTP/1.1

> Host: http://api.refinitiv.com:443

> User-Agent: curl/7.61.1

> Proxy-Connection: Keep-Alive

>

< HTTP/1.1 200 Connection established

<

* Proxy replied 200 to CONNECT request

* CONNECT phase completed!

* ALPN, offering h2

* ALPN, offering http/1.1

* successfully set certificate verify locations:

* CAfile: /etc/pki/tls/certs/ca-bundle.crt

CApath: none

* TLSv1.3 (OUT), TLS handshake, Client hello (1):

* CONNECT phase completed!

* CONNECT phase completed!

* TLSv1.3 (IN), TLS handshake, Server hello (2):

* TLSv1.3 (IN), TLS handshake, [no content] (0):

* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):

* TLSv1.3 (IN), TLS handshake, [no content] (0):

* TLSv1.3 (IN), TLS handshake, Certificate (11):

* TLSv1.3 (IN), TLS handshake, [no content] (0):

* TLSv1.3 (IN), TLS handshake, CERT verify (15):

* TLSv1.3 (IN), TLS handshake, [no content] (0):

* TLSv1.3 (IN), TLS handshake, Finished (20):

* TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):

* TLSv1.3 (OUT), TLS handshake, [no content] (0):

* TLSv1.3 (OUT), TLS handshake, Finished (20):

* SSL connection using TLSv1.3 / TLS_AES_128_GCM_SHA256

* ALPN, server accepted to use h2

* Server certificate:

* subject: C=US; ST=New York; O=REFINITIV US LLC; CN=api.refinitiv.com

* start date: Jul 23 00:00:00 2024 GMT

* expire date: Jul 23 23:59:59 2025 GMT

* issuer: C=GB; ST=Greater Manchester; L=Salford; O=COMODO CA Limited; CN=COMODO RSA Organization Validation Secure Server CA

* SSL certificate verify ok.

* Using HTTP2, server supports multi-use

* Connection state changed (HTTP/2 confirmed)

* Copying HTTP/2 data in stream buffer to connection buffer after upgrade: len=0

* TLSv1.3 (OUT), TLS app data, [no content] (0):

* TLSv1.3 (OUT), TLS app data, [no content] (0):

* TLSv1.3 (OUT), TLS app data, [no content] (0):

* Using Stream ID: 1 (easy handle 0x55fbeb1dd620)

* TLSv1.3 (OUT), TLS app data, [no content] (0):

> GET / HTTP/2

> Host: api.refinitiv.com

> User-Agent: curl/7.61.1

> Accept: */*

>

* TLSv1.3 (IN), TLS handshake, [no content] (0):

* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):

* TLSv1.3 (IN), TLS app data, [no content] (0):

* Connection state changed (MAX_CONCURRENT_STREAMS == 128)!

* TLSv1.3 (OUT), TLS app data, [no content] (0):

* TLSv1.3 (IN), TLS app data, [no content] (0):

* TLSv1.3 (IN), TLS app data, [no content] (0):

< HTTP/2 302

< server: awselb/2.0

< date: Thu, 07 Nov 2024 15:33:14 GMT

< content-type: text/html

< content-length: 110

< location: https://apidocs.refinitiv.com:443/

<

<html>

<head><title>302 Found</title></head>

<body>

<center><h1>302 Found</h1></center>

</body>

</html>

* Connection #0 to host 10.49.98.4 left intact

https://api.refinitiv.com/streaming/pricing/v1/https://api.refinitiv.com/auth/oauth2/v2/token https://api.refinitiv.com/

There were no issues initially. I was able to retrieve data from RTO V2 via HTTP. However, our customer representative requested that I temporarily disable data retrieval in the software due to a planned license upgrade. After the license upgrade was completed, I restarted the software, but I started encountering the error mentioned in the title on the last line of the code below. What should I do in this case?

            ommConsumerConfig.consumerName("Consumer_1");

            ommConsumerConfig.clientId(strClientID);

            ommConsumerConfig.clientSecret(strClientSecret);

            ommConsumerConfig.tokenServiceUrlV2(tokenServiceUrlV2);

            OmmConsumer ommConsumer = EmaFactory.createOmmConsumer(ommConsumerConfig);

Details of the errors:

State: Closed/Suspect/Usage error - text: "Login Rejected. Watchlist size of 0 for 'RSSL' connection is outside of range [1,15000] supported for this ADS fanout tier for this type of connection."

at com.refinitiv.ema.access.OmmBaseImpl.ommIUExcept(OmmBaseImpl.java:1871) ~[ema-3.7.0.0.jar:emaj3.7.0.L1.all.rrg]

at com.refinitiv.ema.access.OmmBaseImpl.handleLoginReqTimeout(OmmBaseImpl.java:1685) ~[ema-3.7.0.0.jar:emaj3.7.0.L1.all.rrg]

at com.refinitiv.ema.access.OmmConsumerImpl.handleAdminDomains(OmmConsumerImpl.java:634) ~[ema-3.7.0.0.jar:emaj3.7.0.L1.all.rrg]

at com.refinitiv.ema.access.OmmBaseImpl.initialize(OmmBaseImpl.java:335) ~[ema-3.7.0.0.jar:emaj3.7.0.L1.all.rrg]

at com.refinitiv.ema.access.OmmConsumerImpl.<init>(OmmConsumerImpl.java:47) ~[ema-3.7.0.0.jar:emaj3.7.0.L1.all.rrg]

at com.refinitiv.ema.access.EmaFactory.createOmmConsumer(EmaFactory.java:237) ~[ema-3.7.0.0.jar:emaj3.7.0.L1.all.rrg]

I am receiving data via WebSocket for RTO v2, and the data comes in the format shown in the attached file. I cannot find out how to assign this data to a variable. I only see it written in the run area. The data is written after the following line of code, but I am unsure how to handle this JSON object on the Java side.

_websocket.sendText(requestJsonString);

In my previously written code, I was able to receive it using fieldlist, but I don't know how to retrieve it in RTO v2.

@Override
public void onRefreshMsg(RefreshMsg refreshMsg, OmmConsumerEvent ommConsumerEvent) {
    arylNewVirbaseRateRics = decodeFieldList(refreshMsg.payload().fieldList());
}

I have one more question. Do I have to use websocket for cloud RTOv2? Can't I get data via http like before? After all, this code will only run at certain times of the day, it doesn't need to be running all the time.

Thanks. RTOv2.txt

Hello,

I was connecting to Cloud RTO 2 using Java. Yesterday afternoon, despite not changing anything related to the connection and being told by the network staff that nothing was modified, I started encountering the following error.

javax.net.ssl.SSLHandshakeException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target

I downloaded the certificate from `api.refinit.com:443` using OpenSSL. After adding this certificate to the Java `cacerts`, I am now getting this error. I wonder where the problem lies. Why was I able to send requests of type "ric" and receive values until yesterday afternoon without any issues, but now I am getting an error?

Connect error for session1:com.neovisionaries.ws.client.HostnameUnverifiedException: The certificate of the peer does not match the expected hostname (us-east-1-aws-3-sm.optimized-pricing-api.refinitiv.net)

Thank you in advance for your assistance.

 /**
                                 * Called when an error occurs while attempting to connect the WebSocket.
                                 */
                                public void onConnectError(WebSocket websocket, WebSocketException e)
                                {
                                    System.out.println(DateTimeStamp.getCurrentTime() + " Connect error for " + _name + ":" + e);
                                    reconnect(websocket, false);
                                }

new 11.txt

Also, Are there any examples of consuming Ric using HTTP requests instead of WebSocket? What advantages does WebSocket provide in this regard? After all, I won't be continuously receiving data; I'll only connect briefly to receive data at certain times of the day. Would WebSocket or a Java example that creates an HTTP request be more advantageous for me?

com.refinitiv.ema.access.OmmInvalidUsageExceptionImpl: loggerMsg
    ClientName: ChannelCallbackClient
    Severity: Error
    Text:    Failed to add RsslChannel(s) to RsslReactor. Channel name(s) Channel_1
Instance Name Consumer_1_1
RsslReactor @17ffd08b
RsslChannel null
Error Id -1
Internal sysError 0
Error Location RestReactor.submitServiceDiscoveryRequestBlocking
Error Text Failed to request service discovery information. Text: {"error":{"id":"04319d5b-e04e-4a0c-8c57-8389bbb7c9bd","code":"insufficient_scope","message":"access denied. Scopes required to access the resource: [trapi.streaming.pricing.read]. Missing scopes: [trapi.streaming.pricing.read]","status":"Forbidden"}}

loggerMsgEnd

Map elementMap = EmaFactory.createMap();
        ElementList elementList = EmaFactory.createElementList();
        ElementList innerElementList = EmaFactory.createElementList();

        innerElementList.add(EmaFactory.createElementEntry().ascii("Channel", "Channel_1"));
        innerElementList.add(EmaFactory.createElementEntry().ascii("Dictionary", "Dictionary_1"));
        elementMap.add(EmaFactory.createMapEntry().keyAscii("Consumer_1", MapEntry.MapAction.ADD, innerElementList));
        innerElementList.clear();

        elementList.add(EmaFactory.createElementEntry().map("ConsumerList", elementMap));
        elementMap.clear();

        configDb.add(EmaFactory.createMapEntry().keyAscii("ConsumerGroup", MapEntry.MapAction.ADD, elementList));
        elementList.clear();

        innerElementList.add(EmaFactory.createElementEntry().ascii("ChannelType", "ChannelType::RSSL_ENCRYPTED"));
        innerElementList.add(EmaFactory.createElementEntry().intValue("EnableSessionManagement", 1));

        elementMap.add(EmaFactory.createMapEntry().keyAscii("Channel_1", MapEntry.MapAction.ADD, innerElementList));
        innerElementList.clear();

        elementList.add(EmaFactory.createElementEntry().map("ChannelList", elementMap));
        elementMap.clear();

        configDb.add(EmaFactory.createMapEntry().keyAscii("ChannelGroup", MapEntry.MapAction.ADD, elementList));
        elementList.clear();

consumer = EmaFactory.createOmmConsumer(
                config.consumerName("Consumer_1")
                        .clientId(RtoConsumerConfig.clientId)
                        .clientSecret(RtoConsumerConfig.clientSecret)
                        .config(configDb)

2024-08-29 04:47:43,307+0000 ERROR [com.refinitiv.ema.access.OmmConsumerImpl] (main) [-] [] loggerMsg

ClientName: Consumer_RTO_1

Severity: Error

Text: login failed (timed out after waiting 45000 milliseconds) for

loggerMsgEnd

2024-08-29 04:47:43,310+0000 ERROR [com.refinitiv.ema.access.OmmConsumerImpl] (main) [-] [] loggerMsg

ClientName: ChannelCallbackClient

Severity: Error

Text: Received ChannelDown event on channel Channel_RTO

Instance Name Consumer_RTO_1

RsslReactor Channel is null

Error Id 0

Internal sysError 0

Error Location Reactor.processWorkerEvent

Error text Error initializing channel: errorId=-1 text=com.refinitiv.proxy.authentication.ProxyAuthenticatorImpl: Unexpected http response code: 403

loggerMsgEnd

The user just run 7 same Calypso scheduled tasks to get FX.USD.ZAR.TN quote. 6 of them completed successfully and just one failed (id 231508).

The user is using RTO v2 and confirmed not connecting through RTDS.

Thank you!

Kind regards,

Vanessa

Client wants clarification on the following:

- Whether the same python code can be used to subscribe to real-time data via ADS over WebSocket. Client would like to lift and shift the workload to on prem setup with minimal changes and no additional development.

- If they connect via WebSocket to ADS would they get full tick or still be limited to conflated (3 updates per second) data.

- Do we recommend client moving to EMA to connect to ADS or they can continue using WebSocket.

- If existing code cannot be used, would new development be needed to connect to ADS over WebSocket. Where can they start for this.

I'm searching for fieldIds which can return me the "ytd" and "ytd in percentage" values for example for Stocks and Bonds. My app is connection via the c# ema sdk to the RTO(Elektron_DD) service and I'm already getting other data like "NETCHANG1".

I'm searching here for the fieldIds but I only found these two (3381 PCTCHG_YTD, 7951 NETCHG_YTD) and they don't return any values.

Is there a fieldId which can give me the wanted values for Stocks ?

Thanks in advance

I will be going ahead and doing the RTO onboarding for the clients in South Asia (primarily India) region. When i try to run the V2 authentication via postman it gives me a message "Access Denied". Can someone please assist me in the process of raising an access request for the same.

Thanks

Lang: Java

V2 Permitted grant type used by service account: ClientCredentials

Hi, my question is regarding Websocket - Java connection to RTO CIAM-V2 on behalf of my client. Appreciate if it can be replied in short time, thanks in advance.

Let me first ask regarding example codes on github. In this client case, the example github code is given like below based on Real-Time WebSocket API: Refinitiv Real-Time Optimized Version 2 Authentication Migration Guide | Devportal (lseg.com) article. Is this code the latest version and valid for Java Websocket api connection to RTO v2 with clientcredentials grant type? Can client directly use this instead of re-coding the current code? I also see MarketPriceRdpGwJwtAuth.java example too, but I assume this is for JWT token grant type for Service ID, not for Service ID with Client Secret. Appreciate if you can confirm this.

websocket-api/Applications/Examples/RDP/java/MarketPriceRdpGwClientCredAuth.java at master · Refinitiv/websocket-api · GitHub

Currently, my client is connected to RTO with Machine IDs and they are using websocket-Java application. In the current version, refresh token is used. To convert it for CIAM-v2, what should they do for refresh token part? Do they need to remove refresh token related parameters-parts from the code? Will this be sufficient? For access token, it is mentioned that v2 authentication does not need to renew an Access Token (HTTP/RSSL-WebSocket) as long as the streaming channel (WebSocket/RSSL) is active. Is there any change required to update on current code for the access token part in case that it disconnects? If same, will it automatically connect without manual interruption required by client? I am a little bit confused because it mentions that v2 have longer access token time as V1: 10 minutes vs V2: 120 minutes while also saying no need for resfresh token in v2. But I assume these are two different things. Is this something related to ClientCredentials grant type or JWT token? If regardless, does this mean any change required on client code for access token related parameters or is this just something on our end?

Thank you very much for your assistance, wishing a great weekend ahead.

Best Regards,

Bazit

In step 4, it requires to call a method that I don't currently see in the code base.

I am currently testing my RTO environement with a couple of field id for european equities.

One of my field is TWAP, with id 10506, is always 0.

Is this field available on a test environment and teh delayed data mode with "/" before RIC?

Thank you

"With the new authentication, is it possible for us to be able to connect from a developer box, versus just the two VMs with the MachineID I had set up previously? It's very inconvenient for us to develop on our test VM as it is now being used very frequently for automated tests and other testing purposes."

Please advise.

Thank you

I am trying to create the OmmConsumer object by providing the EmaConfig parameters, username and Consumer Name.

OmmConsumerConfig config = EmaFactory.createOmmConsumerConfig(configPath);
consumer = EmaFactory.createOmmConsumer(config.consumerName(consumerName).username(userName));

I am getting the below Exception and connection is not getting established.

Exception in thread "pool-15-thread-1" java.lang.NoClassDefFoundError: Could not initialize class com.refinitiv.eta.transport.WebSocketRequestHeader

at com.refinitiv.eta.transport.WebSocketHandlerImpl.createRequestHandshake(WebSocketHandlerImpl.java:143)

at com.refinitiv.eta.transport.RsslSocketChannel.initChnlSendWebSocketHandshakeRequest(RsslSocketChannel.java:3533)

at com.refinitiv.eta.transport.RsslSocketChannel.init(RsslSocketChannel.java:3430)

at com.refinitiv.eta.valueadd.reactor.Worker.initializeChannel(Worker.java:575)

at com.refinitiv.eta.valueadd.reactor.Worker.run(Worker.java:99)

at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)

at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)

at java.lang.Thread.run(Thread.java:750)

I am using EMA and ETA version 3.7.3.0 library and all the libraries are part of the class path.

export CLASSPATH="<path>/ema-3.7.3.0.jar:$CLASSPATH"

export CLASSPATH="<path>/eta-3.7.3.0.jar:$CLASSPATH"

export CLASSPATH="<path>/etaValueAdd-3.7.3.0.jar:$CLASSPATH"

export CLASSPATH="<path>/etaValueAddCache-3.7.3.0.jar:$CLASSPATH"

export CLASSPATH="<path>/ansipage-3.7.3.0.jar:$CLASSPATH"

export CLASSPATH="<path>/etajConverter-3.7.3.0.jar:$CLASSPATH"

export CLASSPATH="<path>/commons-configuration2-2.9.0.jar:$CLASSPATH"

export CLASSPATH="<path>/commons-lang3-3.13.0.jar:$CLASSPATH"

export CLASSPATH="<path>/commons-text-1.11.0.jar:$CLASSPATH"

export CLASSPATH="<path>/httpcore-nio-4.4.16.jar:$CLASSPATH"

export CLASSPATH="<path>/jose4j-0.9.3.jar:$CLASSPATH"

export CLASSPATH="<path>/lz4-java-1.8.0.jar:$CLASSPATH"

export CLASSPATH="<path>/xpp3-1.1.4c.jar:$CLASSPATH"

Below the channel configuration defined in EmaConfig.xml

<Channel>

<Name value="Channel_3"/>

<ChannelType value="ChannelType::RSSL_ENCRYPTED"/>

<EncryptedProtocolType value="EncryptedProtocolType::RSSL_WEBSOCKET"/>

<GuaranteedOutputBuffers value="5000"/>

<Host value="host"/>

<Port value="port"/>

<WsMaxMsgSize value="61440"/>

<WsProtocols value="tr_json2"/>

</Channel>

Did anyone faced similar issue and able to resolve it?

In login response we receive {"TRCE:MaxMessagesPerSecond":1000} . Is it the api rate limit? Does it matter if messages equally distributed or we can send all messages (up to the limit) in a fraction of a second?